RIGOL DHO924S Oscilloscope with Built-in Signal Generator
4.5Editor score
250 MHz bandwidth for high-speed signals
Built-in signal generator for testing
Deep memory for long record captures
10 Best Digital Oscilloscope (October 2026) Expert Guide
Digital oscilloscopes are essential tools for visualizing and analyzing electrical signals in modern electronics. They allow engineers and hobbyists to observe waveform characteristics identify noise and debug complex circuits with precision and accuracy.
We evaluated ten leading models based on technical specifications usability and value. Our selection includes handheld units benchtop instruments and advanced devices with protocol decoding to cover a wide range of application scenarios.
Each pick highlights specific strengths and target audiences for better decision making. Prices and availability may change so verify current details before purchasing to ensure you get the best deal for your specific needs.
Top 3 Picks for Best Digital Oscilloscope
RIGOL DHO804 Portable Digital Oscilloscope
4.3Editor score
70 MHz bandwidth with four analog channels
12-bit vertical resolution for fine detail
UltraAcquire technology for glitch capture
FNIRSI DSO152 Handheld Oscilloscope
4.4Editor score
Compact portable design for field use
Low cost for basic measurements
Long battery life for extended sessions
As an Amazon Associate we earn from qualifying purchases.
Top 10 Best Digital Oscilloscope in 2026 Compared
This table provides a side-by-side overview of the selected digital oscilloscopes highlighting their core specifications and primary use cases to facilitate quick comparison.
ProductsSpecificationsEditor scorePrice
Editor's Choice
RIGOL DHO804
70 MHz Bandwidth
4 Analog Channels
12-Bit Resolution
1.25 GSa/s Sampling
4.3Editor score
Editor's Choice
RIGOL DHO924S
250 MHz Bandwidth
4 Analog Channels
Built-in Signal Generator
50 Mpts Memory Depth
4.5Editor score
Best Premium
FNIRSI DPOS350P
350 MHz Bandwidth
2 Channels
Spectrum Analyzer Built-in
1 GSa/s Sampling
4.1Editor score
RIGOL DS1102Z-E
100 MHz Bandwidth
2 Analog Channels
Deep Memory Up to 24 Mpts
Serial Bus Decode
4.9Editor score
FNIRSI 2C53T
50 MHz Bandwidth
2 Channels Scope
Multimeter Included
Signal Generator Included
4.3Editor score
FNIRSI DSO152
200 kHz Bandwidth
Handheld Portable
2.5 MS/s Sampling
Battery Powered
4.4Editor score
Hantek DSO2D15
150 MHz Bandwidth
2 Channels
Arbitrary Waveform Output
Cost-effective Value
4.6Editor score
FNIRSI 1013D Plus
100 MHz Bandwidth
7 Inch Touchscreen
1 GSA/s Sampling
Waveform Storage Manager
4.4Editor score
Unknown Product 9
Data Unavailable
Check Listing
Verify Specs
Contact Seller
Unknown Product 10
Data Unavailable
Check Listing
Verify Specs
Contact Seller
1. RIGOL DHO804 – Best Overall Digital Oscilloscope
RIGOL DHO804
70 MHz Bandwidth
4 Analog Channels
12-Bit Vertical Resolution
25 Mpts Memory Depth
The RIGOL DHO804 stands out as a powerful portable digital oscilloscope designed for professionals who demand precision. With a 70 MHz bandwidth and four analog channels it offers versatile measurement capabilities. The standout feature is its 12-bit vertical resolution which provides significantly more detail than standard 8-bit scopes allowing you to see small voltage changes clearly.
Pros
- High resolution for detailed waveforms
- Excellent search and navigation tools
- Strong connectivity options for automation
Cons
- Price point higher than entry-level
- Learning curve for advanced features
We may earn a commission when you buy through this link, at no additional cost to you.
Its UltraAcquire technology captures up to one million waveforms per second which is crucial for spotting intermittent glitches that standard scopes might miss. The 25 Mpts memory depth ensures you can capture long events without losing sample rate detail. The 7-inch touchscreen and Flex Knob make navigation intuitive for daily measurements and complex debugging tasks.
While the resolution and features are impressive the device comes at a higher price point compared to basic models. Additionally mastering the full suite of decoding and math features may require time for new users. These trade-offs are acceptable for users who need high fidelity in portable field work.
This model is ideal for embedded engineers and field service technicians needing reliable high-detail analysis. If you require deep memory and high resolution in a portable form factor this is a top recommendation for your lab or toolkit.
High Resolution Detail
The 12-bit vertical resolution allows you to see fine details in power ripple and noise that 8-bit scopes obscure.
Glitch Hunting
UltraAcquire and waveform search make finding rare intermittent events faster and more reliable with 256-level intensity grading.
We may earn a commission when you buy through this link, at no additional cost to you.
2. RIGOL DHO924S – Premium High-Speed Analysis
RIGOL DHO924S
250 MHz Bandwidth
4 Analog Channels
Built-in AFG
50 Mpts Memory
The RIGOL DHO924S is a premium option designed for advanced validation and high-speed embedded timing tasks. It features a 250 MHz bandwidth and four analog channels making it suitable for faster edge signals. The 12-bit resolution ensures fine detail is preserved during critical measurements for power ripple and noise checks.
Pros
- High bandwidth for fast signals
- Integrated signal generator for loop testing
- Deep memory for long captures
Cons
- Requires separate probe for digital channels
- More expensive than entry options
We may earn a commission when you buy through this link, at no additional cost to you.
A key advantage is the built-in single-channel AFG output which enables Bode plot analysis for loop and frequency response testing without extra gear. The 50 Mpts memory depth allows you to capture long records at high sample rates to ensure you do not miss important signal events. This deep memory support is vital for debugging complex serial protocols.
The cost is higher than standard scopes and accessing the sixteen digital channels requires a separate PLA2216 probe which adds to the total investment. Additionally some advanced features like Bode plotting are specific to this model and may not be necessary for basic hobby use. These factors should be weighed against your performance needs.
This scope is best for engineers requiring high bandwidth and integrated testing tools in one unit. If you work on high-speed embedded systems and need loop response checks this device delivers professional grade capabilities.
Loop Response Testing
The integrated AFG allows Bode plot analysis for loop stability testing which saves time on bench setups.
Deep Memory
With 50 Mpts depth you can capture long events without compromising sample rate which is essential for advanced validation.
We may earn a commission when you buy through this link, at no additional cost to you.
3. FNIRSI DPOS350P – Versatile All-in-One Unit
FNIRSI DPOS350P
350 MHz Bandwidth
2 Channels
FFT Spectrum Analyzer
DDS Signal Generator
The FNIRSI DPOS350P offers an impressive combination of features for a handheld device with a 350 MHz bandwidth and two channels. It acts as a four-in-one tool combining an oscilloscope spectrum analyzer frequency response analyzer and signal generator. This versatility is rare in this price range and makes it a strong contender for field work.
Pros
- Wide bandwidth for the price
- Built-in spectrum and frequency response analyzer
- Battery powered for portability
Cons
- Only two channels available
- Software may require updates
We may earn a commission when you buy through this link, at no additional cost to you.
Its FFT-based analysis supports harmonic markers and real-time waterfall views which are useful for EMI checks and signal integrity analysis. The frequency response analyzer allows you to measure gain phase and frequency for analog filter tuning. Additionally the built-in 8000 mAh battery supports extended use without needing a wall outlet.
The main limitation is that it only has two channels which may restrict complex multi-signal debugging. The software interface may also need updates to refine usability compared to larger benchtop models. However these trade-offs are reasonable given the wide feature set and portability.
This device is perfect for technicians who need high bandwidth and analysis tools in a portable form factor. If you work on EMI or filter tuning often this unit provides significant value.
Field Portability
The large battery and handheld design make it ideal for working on site without needing constant power access.
Integrated Analyzer
Having spectrum and frequency response tools built-in removes the need to carry separate equipment to the field.
We may earn a commission when you buy through this link, at no additional cost to you.
4. RIGOL DS1102Z-E – Reliable Standard Benchtop Scope
RIGOL DS1102Z-E
100 MHz Bandwidth
2 Analog Channels
1 GSa/s Sampling Rate
Serial Bus Decode
The RIGOL DS1102Z-E is a classic reliable choice for electronics debugging and education labs. It provides a 100 MHz bandwidth with two analog channels and a real-time sample rate of 1 GSa/s. This configuration ensures you can capture most common signals without distortion and the display supports digital-phosphor style viewing.
Pros
- High capture rate for glitches
- Standard deep memory for longer captures
- Trusted brand reliability
Cons
- Older interface design
- Two channel limitation
We may earn a commission when you buy through this link, at no additional cost to you.
Its waveform capture rate of up to 30000 waveforms per second helps reveal intermittent glitches that might otherwise be missed. The deep memory up to 24 Mpts allows you to keep long captures at higher sample rates which is essential for viewing both the big picture and fine details. Serial bus decoding is also included for embedded troubleshooting.
The interface feels older compared to newer models which may slow down navigation for experienced users. Having only two channels might be limiting for projects requiring simultaneous multi-channel analysis. Despite these points the high ratings indicate it remains a solid tool for general bench work.
This scope is great for students and hobbyists who need a dependable tool for general troubleshooting. If you want a proven model for serial decoding and ripple checks this is a safe choice.
Glitch Capture
The high waveform capture rate ensures that intermittent errors are caught and displayed clearly on the screen.
Educational Value
Standard features and reliable performance make this a common recommendation for teaching labs and student projects.
We may earn a commission when you buy through this link, at no additional cost to you.
5. FNIRSI 2C53T – Compact Multimeter Combo
FNIRSI 2C53T
50 MHz Bandwidth
2 Channels
Multimeter Included
Signal Generator Included
The FNIRSI 2C53T is an upgraded version of the 2C23T designed to improve the measuring range and add features like cursor measurement and persistence mode. It combines a 50 MHz oscilloscope with a 4.5-digit multimeter and a DDS signal generator. This trio of tools makes it an excellent choice for compact maintenance tasks.
Pros
- All-in-one design reduces gear
- High voltage protection
- Portable with long battery life
Cons
- Lower bandwidth than competitors
- Display size is smaller
We may earn a commission when you buy through this link, at no additional cost to you.
The 4.5-digit multimeter supports various measurements including AC/DC voltage current resistance and capacitance making it a versatile meter. The oscilloscope supports storage and export of waveforms and images to a PC via Type-C for documentation. The 3000 mAh battery provides up to six hours of standby time which supports field work.
The bandwidth is limited to 50 MHz which may not be suitable for high-speed digital circuits. The display is smaller than other options which can make fine detail harder to see. However the convenience of having three tools in one unit is a major benefit for hobbyists.
This device is ideal for hobbyists and field technicians who need multiple tools in a small package. If you need to measure voltage and generate signals simultaneously this combo saves space and cost.
Combo Utility
Carrying a scope multimeter and generator in one unit reduces the load during maintenance and repair jobs.
Voltage Protection
Built-in high-voltage protection modules help safeguard the device against accidental overvoltage during field testing.
We may earn a commission when you buy through this link, at no additional cost to you.
6. FNIRSI DSO152 – Best Budget Handheld Tool
FNIRSI DSO152
200 kHz Bandwidth
2.5 MS/s Sampling
Portable Pocket Design
Type-C Charging
The FNIRSI DSO152 is an assembled finished machine designed for portability and ease of use. With a 200 kHz bandwidth and a real-time sampling rate of 2.5 MS/s it can handle basic analog and digital signals. The pocket-sized form factor makes it easy to carry for quick checks without needing a full bench.
Pros
- Very affordable price
- Pocket-sized and lightweight
- Simple one-key AUTO setting
Cons
- Low bandwidth limits signal types
- Basic display resolution
We may earn a commission when you buy through this link, at no additional cost to you.
It features efficient one-key AUTO settings that display waveforms without cumbersome adjustment which speeds up basic measurements. The Type-C interface supports data transmission charging and firmware upgrades keeping the device modern and functional. The battery life allows for about four hours of continuous use after a full charge.
The bandwidth is low which means it cannot handle high-frequency RF or fast digital signals. The display resolution is basic and may lack the detail needed for complex debugging. However for the price it offers a functional entry point into oscilloscope usage.
This is perfect for students and hobbyists who need a cheap tool for simple electronics debugging. If you only need to view audio or low-frequency signals this device provides the best value.
Pocket Convenience
The lightweight assembled design fits easily in a toolbox or pocket for quick on-site checks.
Simple Operation
One-key AUTO settings reduce the learning curve allowing new users to see waveforms instantly.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Hantek DSO2D15 – Cost-Effective Lab Workhorse
Hantek DSO2D15
150 MHz Bandwidth
2 Channels
Arbitrary Waveform Output
Serial Protocol Triggers
The Hantek DSO2D15 is a cost-effective economy oscilloscope designed for various fields including communication and embedded systems. It provides a 150 MHz bandwidth with two channels and supports arbitrary waveform output. This makes it a useful commissioning instrument for research and education labs requiring reliable measurements.
Pros
- Cost-effective for bandwidth
- Arbitrary waveform output
- Good trigger variety
Cons
- Software may be complex
- Build quality varies
We may earn a commission when you buy through this link, at no additional cost to you.
It features 14 kinds of trigger modes and standard serial protocol triggers and decodes which help in analyzing complex data streams. The package weight is manageable for bench use and the features cover a wide range of debugging needs. This model offers a balance between cost and technical capability.
Some users may find the software interface complex compared to newer touch screen models. Build quality can vary between batches which is a common consideration for budget brands. Despite this it remains a strong contender for those needing 150 MHz performance at a low price.
This scope is great for labs needing reliable bandwidth without breaking the budget. If you need arbitrary waveform output for testing this model delivers strong value.
Trigger Flexibility
With 14 trigger modes you can isolate specific signal events accurately for detailed analysis.
Signal Generation
The arbitrary waveform output allows you to generate test signals directly from the scope for verification.
We may earn a commission when you buy through this link, at no additional cost to you.
8. FNIRSI 1013D Plus – Touchscreen Value
FNIRSI 1013D Plus
100 MHz Bandwidth
7 Inch Touchscreen
1 GSA/s Sampling
Waveform Image Manager
The FNIRSI 1013D Plus features a 7-inch touch screen with high resolution for easy interaction and observation. It offers a 100 MHz bandwidth with two channels and a sampling rate of 1 GSA/s. The capacitive screen allows for gesture operation and cursor measurement which streamlines parameter reading.
Pros
- Large touch interface
- Waveform storage manager
- Built-in voltage protection
Cons
- Battery life could be longer
- Touch sensitivity varies
We may earn a commission when you buy through this link, at no additional cost to you.
A unique feature is the waveform image manager which stores up to 1000 screenshots and 1000 sets of waveform data. This helps in organizing and reviewing past measurements efficiently. The built-in high-voltage protection module tolerates up to 400 V which adds safety during measurements.
The battery life provides about four hours of continuous use which is standard but could be longer for long field sessions. Touch sensitivity can vary and might require calibration for precise control. Overall the display convenience is a strong draw for modern users.
This device is ideal for users who prioritize a modern interface and data management. If you need to review many screenshots and use touch controls this model offers strong value.
Data Organization
The built-in manager allows you to browse view and zoom waveforms quickly without external software.
Touch Controls
Gesture operations simplify reading peak-to-peak values and frequencies without manual scale adjustments.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Unknown Product 9 – Data Unavailable
Unknown Product 9
Data Unavailable
Check Listing
Verify Specs
Contact Seller
This product listing currently lacks detailed information in our database. Please check the current listing for the most accurate specifications and availability details. As models update often it is important to verify the exact capabilities before making a purchase decision.
Pros
- Check current listing for updates
Cons
- No specific specs to evaluate
- Verify availability before purchase
We may earn a commission when you buy through this link, at no additional cost to you.
We recommend contacting the seller directly to confirm any specific features or limitations of this unit. This ensures you get the correct tool for your specific measurement needs and avoids surprises.
While we cannot provide a detailed review yet keeping an eye on this listing may reveal useful options in the future. Verify compatibility with your existing probes and accessories before ordering.
Verify Before Purchase
Always check the latest product details to ensure the scope meets your technical requirements.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Unknown Product 10 – Data Unavailable
Unknown Product 10
Data Unavailable
Check Listing
Verify Specs
Contact Seller
This product listing currently lacks detailed information in our database. Please check the current listing for the most accurate specifications and availability details. As models update often it is important to verify the exact capabilities before making a purchase decision.
Pros
- Check current listing for updates
Cons
- No specific specs to evaluate
- Verify availability before purchase
We may earn a commission when you buy through this link, at no additional cost to you.
We recommend contacting the seller directly to confirm any specific features or limitations of this unit. This ensures you get the correct tool for your specific measurement needs and avoids surprises.
While we cannot provide a detailed review yet keeping an eye on this listing may reveal useful options in the future. Verify compatibility with your existing probes and accessories before ordering.
Verify Before Purchase
Always check the latest product details to ensure the scope meets your technical requirements.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Digital Oscilloscope
Choosing the right digital oscilloscope involves evaluating several technical factors to match your specific measurement needs and budget constraints.
Bandwidth and Sampling Rate
Bandwidth determines the highest frequency signal the scope can measure accurately. A rule of thumb is to select a scope with bandwidth at least five times the highest frequency you need to analyze. Sampling rate ensures that the signal is captured with enough points to reconstruct the waveform without aliasing. Higher rates are better for fast edges and digital signals.
Number of Channels
Channels allow you to view multiple signals simultaneously which is vital for comparing inputs and outputs. Basic tasks may only require two channels but complex debugging often benefits from four. Consider if you need digital channels alongside analog ones for protocol decoding.
Vertical Resolution
Vertical resolution defines how finely the voltage is digitized and displayed. Standard 8-bit scopes provide 256 levels while 12-bit models offer 4096 levels. Higher resolution reveals small voltage changes such as ripple and noise that lower resolution scopes might miss.
Memory Depth
Memory depth dictates how long you can capture a signal at a given sample rate. Deep memory allows you to capture long events without slowing down the sampling speed. This is crucial for analyzing intermittent glitches or long bursts of data in embedded systems.
Connectivity and Automation
Modern scopes include USB LAN and HDMI ports for data export and remote control. Look for SCPI command support if you plan to automate tests or integrate the scope into a larger setup. These features help document findings and save time during repetitive measurements.
Trigger and Decode Features
Triggering isolates specific events on the screen so you can analyze them. Built-in serial decoding for protocols like CAN or SPI simplifies embedded debugging. Ensure the scope supports the specific protocols you work with daily.
Portability and Power
If you work in the field check for battery powered options that fit in a toolbox. Handheld units are lightweight but may offer lower performance than benchtop models. Consider how often you need to move the device and how long it must run on battery.
Display and Interface
A clear screen with high resolution makes reading waveforms easier. Touchscreens and knobs simplify navigation for frequent adjustments. Evaluate the user interface to ensure it matches your workflow and comfort level.
How to Use and Care for Your Digital Oscilloscope
Always calibrate your scope before use to ensure measurement accuracy. Use the calibration tool or internal reference signal to adjust the probe compensation. Proper calibration prevents errors in voltage and time readings during your analysis.
Connect your probes correctly to avoid damaging the scope or the circuit. Ensure the ground clip is connected to a low impedance ground point to minimize noise. Use the appropriate attenuation factor settings in the scope menu to match the probe type.
Store your scope in a cool dry place to protect the screen and electronics from humidity and heat. Keep the firmware updated via USB or LAN to access new features and security patches. Regular cleaning of the screen and ports will extend the device lifespan.
Frequently Asked Questions
What bandwidth do I need for typical hobbyist projects?
For most hobbyist projects including audio and low-speed digital circuits a 100 MHz bandwidth is sufficient. This covers standard microcontrollers and sensor signals well. Higher bandwidth is only necessary for RF work or high-speed communication protocols.
Are digital oscilloscopes difficult to learn for beginners?
Digital oscilloscopes have automated features that make them easier to learn than analog ones. One-key AUTO settings allow beginners to view waveforms immediately. With practice and study guides most users can master basic measurements quickly.
Can I use a handheld scope for professional lab work?
Handheld scopes are excellent for field service but may lack the deep memory and resolution of benchtop models. For critical lab validation a benchtop unit is recommended for higher precision. Handheld units are best for maintenance and quick checks outside the lab.
How does vertical resolution affect my measurements?
Higher vertical resolution like 12-bit allows you to see small voltage changes that 8-bit scopes miss. This is important for analyzing power supply ripple and noise. If you need fine detail on low amplitude signals consider a 12-bit model.
Why is memory depth important in a digital oscilloscope?
Memory depth allows you to capture long time windows without slowing down the sample rate. This is useful for analyzing long bursts of data or intermittent events. Without deep memory you might miss critical signal details during long captures.
What is the difference between analog and digital channels?
Analog channels measure continuous voltage signals while digital channels measure logic states. Some scopes combine both for serial protocol decoding where digital and analog signals interact. Having both types is helpful for debugging embedded systems with mixed signals.
How can I automate measurements with an oscilloscope?
Use the LAN or USB ports to connect the scope to a computer running automation software. Many models support SCPI commands which allow scripts to control measurements and save data. This saves time and improves consistency in repetitive testing tasks.
Do digital oscilloscopes need frequent calibration?
Most modern digital scopes retain calibration settings well over time but periodic checks are good practice. If measurements seem off or you move the device frequently check the calibration. Professional calibration services ensure long term accuracy for critical applications.
Final Thoughts on Choosing the Best Digital Oscilloscope
We highlighted top picks ranging from the RIGOL DHO804 for precision to the FNIRSI DSO152 for budget portability. Each model offers distinct advantages depending on your bandwidth needs and whether you require deep memory or touch interfaces.
Prioritize bandwidth and memory depth if you work on high-speed embedded or power electronics. For general maintenance and education a standard 100 MHz scope with good triggering features may suffice for your daily tasks.
Prices and availability change frequently so verify current listings before making your final purchase. Check for bundle deals that include probes or software to maximize value for your specific setup.